Product Details
Product Introduction
Efficient water-based adhesive, Suitable for pasting all types of PVC coil and sheet flooring,PVC backing carpet on the absorbent substrate.
Features
- Environmentally friendly;
- Good initial adhension; just laying the floor is not easy to shift;
- Good final adhension,after curing extrusion impact resistant furniture steering wheel.
Technical Data
| Specification | Details |
|---|---|
| Color | Ivory |
| PH value | 7-8 |
| Density | 1.4 kg per L |
| Consumption | 200-350g/㎡ |
| Wait time | About 10 minutes ( due to temperature and humidity vary) |
| Can load time | ≥24h |
| Final setting time | ≥7d |
Installation Guide
Applicable Substrate:
1. Suitable for porous absorbent , strong, smooth, dry , clean, no cracks , no grease, no wax floors
2. Suitable for self-leveling leveling layer.
3. Suitable for aerial wood flooring , plywood or particleboard cushion
Substrate Treatment:
Substrate if has oil contamination, wax water and mold release, required wax water decontamination to treatment; recommend M318 Water-Based Primer or M139 for closed minor sand ground ( porous absorbent subfloor); recommend MSYH Self-Leveling Polymer Cement for leveling uneven ground( leveling thickness at least 2mm); recommend M190 Epoxy Reinforcement and Moisture-proof Primer for treatment wet subfloor moisture. The subfloor presence of cracks recommend M190 Epoxy Reinforcement and Moisture-proof Primer or M220 Rapid Repair Mortar to repair.
Construction Method:
Don’t dilution, use the appropriate scraper (A2 scraping tooth) coated the adhesive evenly on the substrate surface. If finding surface with a small amount of clear fluid after opening bucket, need to stir the glue evenly and then construction. According to the temperature and humidity of the construction site and wait for about 10 to 20 minutes (there is a clear sense of drawing) and then laying the floor, then push cork to make flooring flattened and use 50kg rolling device to roll on the paved floor to get better effect.
Notes:
If the temperature is below 15℃ construction or relative humidity above 75%, please consult our technical staff opinion. If mucilage with conjunctiva after opening, need to weed out first, stir evenly before use. Don’t put glue dumped into the sewer or gutterway. Unused glue should be kept sealed. Tools can be cleaned with water .
Packaging and Storage :
25kg or 5kg plastic drum. This product should be stored at indoor 5℃-35℃, prevent freezing, solarization. Shelf life of 12 months.